PHOENIX Contact Relay REL-MR- 24DC/21 (2961105) with Relay Socket PLC-BSC-24DC/21

This plug-in miniature power relay is highly useful for converting signals from 24VDC to a potential-free contact. Ideal for most sensors operating on 24VDC, it can convert signals to 5VDC or other voltages up to 250V AC/DC. Note that this relay is not a solid-state relay therefore it is not recommended for data transmission.

Features

• Test Voltage: Relay winding/relay contact: 4 kV AC (50 Hz, 1 min)
• Operating Mode: 100% operating factor
• Degree of Protection: RT III (wash-proof)
• Mechanical Service Life: 20 million cycles
• Standards/Regulations: IEC 60664
• Degree of Pollution: 3
• Overvoltage Category: III
• Mounting Position: Any
• Assembly Instructions: In rows with zero spacing

Specifications

• Nominal Input Voltage (UN): 24 V DC
• Typical Input Current at UN: 7 mA
• Typical Response Time: 5 ms
• Typical Release Time: 2.5 ms
• Coil Resistance: 3390 Ω ±10% (at 20 °C)
• Power Dissipation for Nominal Condition: 0.17 W
• Contact Material: AgSnO
• Maximum Switching Voltage: 250 V AC/DC
• Minimum Switching Voltage: 5 V (at 100 mA)
• Minimum Switching Current: 10 mA (at 12 V)
• Maximum Inrush Current: 10 A (4 s)
• Limiting Continuous Current: 6 A
• Interrupting Rating (Ohmic Load) Max: 140 W (at 24 V DC)
• Switching Capacity: According to DIN VDE 0660/IEC 60947: 2 A (at 24 V, DC13)