Slim Plastic Body Area Sensors
The BWP area sensors feature a flat and compact body size (13 mm) made of high strength PC/ABS (Polycarbonate/Acrylonitrile Butadiene Styrene) plastic. The sensors use high performance Fresnel lens and have high-speed response time of under 7 ms. Four different configurations are available based on the number of optical axes and detection area size. Light ON and Dark ON operation modes switching is available. The also features various user-friendly functions including operation test function and mutual interference prevention functions.
TECHNICAL SPECIFICATIONS
Sensing type: Through-beam type (direct beam)
Sensing distance: 0.1 to 5m
Light source: Infrared LED (850nm modulated)
Optical axis pitch: 20mm
Number of optical axes: 8
Sensing height/Total length: 140/190mm
Power supply: 12-24VDC ±10% (ripple P-P: max. 10%)
Control output: NPN open collector
Operation mode: Light ON/Dark ON (set by switch)
Environment_Ambient illumination: Sunlight: Max. 10,000 lx (receiver illumination)
Environment_Ambient temperature: -10 to 55?, storage: -20 to 60?
Connection type: Cable type (Ø3.5, 3m)
Protection structure: IP40
Environment_Ambient humidity: 35 to 85% RH, storage: 35 to 85% RH
Min. sensing target: Opaque material of min. Ø30mm
Response time: Max. 6ms (frequency B selection is max. 7ms)
Material: Case: Polycarbonate/Acrylonitrile butadiene styrene, Sensing part: Polymethyl methacrylate
Cable specification: Ø3.5mm, 4-wire, 3m(emitter: Ø3.5mm, 4-wire, 3m) (AWG 24, core diameter: 0.08mm, number of cores: 40, insulator out diameter: Ø1mm)
Reviews
There are no reviews yet.